We do, we usually have a selection of used motors in stock. Some are rebuilt on site and some are customers consignment engines. But all are checked over by our staff to ensure running condition before they are sold . That way you always know what your getting. We try to be as transparent as possible.
These motors are sold "AS IS" , we don't give warranty as they are pre-owned .
Yes. We are an authorized Mercury Dealer.
Yes! However, a lot of our used inventory is not on site, so it may take a few days to get an answer for you whether we have it or not.
Yes we do some bottom painting & power washing at the present time.
Yes we do. In fact, we can….
Our current shop rate is $130 per hour.
1-10-1 is a simple way to remember the first three phases of cold water immersion and the approximate time each phase takes.
1 Minute - Cold Shock:
10 Minutes - Cold Incapacitation:
1 Hour - HYPOTHERMIA:
According to any warranty, your motor should be flushed when running is salt water every time you use it for at lease 10 minutes with fresh water to remove all salt, muddy, or heavily polluted water. So you don’t get a build up which can cause serious and costly repairs. We do carry a product called “salt-away” which we suggest you use.
Oil changes should be done every 100 hours or once a year. If you are buying a new mercury motor from us we suggest you get a 20 hour service. This will give us a chance to make sure all is in good working order.
.png){kind=spacer}